Published at Wednesday, December 20th 2017. by Earlene Nielsen in Home Design.
Because lot sizes vary from large to small, setbacks may be an issue. Another factor is whether or not the site is level or has a slope. Sloped sites are quite workable but present unique challenges that must be considered. Generally on sloped lots the hangars are placed on the lower section and the home on the higher section which allows the home and hangar to blend with one another nicely.
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.
There are many elements of design that go into a universal home, but several of the most important are constructed into the bathroom area, kitchen, hallways and the construction level of the home. The bathroom is perhaps one of the most important areas of the home, as it is designed to be accessible by combining within the design some handicap requirements. Wider doorways for wheelchair accessiblity, nonslip flooring, wet room style spaciousness and open shower areas are just some of the common features for a handicap bath area that can be enjoyed by all.
Other important aspects include choosing a design that keeps the house on one ground level and that does not include stairs or other common obstacles to those who are less mobile. If you are interested in the useful aspects of a universal home design, there are more and more designers and contractors available who are experienced at creating houses that are accessible for everyone.
Windows are also crucial in creating open spaces in minimalist house designs. Large sliding windows are ideal. If you need to use blinds, select those made of bamboo or wood or those that are of neutral color. If you prefer to use curtains, do not use ones with floral or ornate prints. Choose those with sheer materials, preferably of white, beige, sand, and other neutral hues.
These are only a few points to consider in the design of your hangar home - there are many others. Due to the uniqueness of hangar homes design it is recommended that you choose a designer who has had ample experience in designing hangar homes and who preferably lives and a hangar home personally. If you are looking for designs on the Internet, you will likely become frustrated. If you are intending to invest in a hangar homes to be built, it is best to find a designer to custom design a plan uniquely for you. Regardless of what type of design you end up building, your decision to design and build a hangar home will be, without doubt, one of the most thrilling and fulfilling actions you will take a pilot.