Published at Wednesday, December 13th 2017. by Joanna Curtis in Home Design.
New home ideas and trends will enable you to design your dream home as you see fit. Your newly built home does not have to be a box divided by walls. Impressive solutions for a functional home exist for all budgets.
Another common point to consider is whether or not to connect the hangar in the home. Connecting or not connecting each has its advantages and disadvantages. Connecting the hangar to the home is considered by most pilots to be quite advantageous. It allows one to stay out of the weather. It makes for some very interesting architecture. But if you are looking to build projects then you need to consider the impact made by these projects such as sounds and smells which you may not want to enter into the home. In such instances building the hangar and home separately may be the way to go.
There are many elements of design that go into a universal home, but several of the most important are constructed into the bathroom area, kitchen, hallways and the construction level of the home. The bathroom is perhaps one of the most important areas of the home, as it is designed to be accessible by combining within the design some handicap requirements. Wider doorways for wheelchair accessiblity, nonslip flooring, wet room style spaciousness and open shower areas are just some of the common features for a handicap bath area that can be enjoyed by all.
Another thing to consider is fuel. Do you want to keep fuel in a fuel tank that you will keep inside your hangar? Perhaps there is fuel on the property that is maintained by the Association; this can be an excellent way when available. Of course, one can always fly out for fuel and this is workable most of the time but it does require careful organization of one is flights and fuel stops.
Important design elements
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.