Published at Sunday, December 10th 2017. by Hilary Mccarthy in Home Design.
These are just some ideas to help you have your own home in the minimalist look that you want. You can add in your own concepts to add personal touches. Simply keep in mind about open spaces and being one with nature and you wont go wrong.
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.
Another common point to consider is whether or not to connect the hangar in the home. Connecting or not connecting each has its advantages and disadvantages. Connecting the hangar to the home is considered by most pilots to be quite advantageous. It allows one to stay out of the weather. It makes for some very interesting architecture. But if you are looking to build projects then you need to consider the impact made by these projects such as sounds and smells which you may not want to enter into the home. In such instances building the hangar and home separately may be the way to go.
Place the main furniture first: One of the most effective home designing tips to avoid cluttering at your home is to place the main and the most important furnishing first. For example, beds, couches, desks at all should be placed first and at the center of the room so that enough space is left for the placement of the rest of the furniture. Make sure that large pieces of the furniture are evenly placed in the room to strike the right balance. After the placement of the main pieces is done, then place the rest of the sundry furniture to ensure smooth flow of the traffic in the room.
At the height of the housing downturn the most impacted areas in new home design were also once the most lucrative: kitchens and baths. For several years new home owners passed on popular and expensive add-ons to their kitchens and bathrooms such as water filtration systems, large pantry areas and natural wood cabinets. However, a recently published A.I.A Home Design Trends Survey indicates these functions and more might see a comeback.
Another thing to consider is fuel. Do you want to keep fuel in a fuel tank that you will keep inside your hangar? Perhaps there is fuel on the property that is maintained by the Association; this can be an excellent way when available. Of course, one can always fly out for fuel and this is workable most of the time but it does require careful organization of one is flights and fuel stops.