Published at Wednesday, December 20th 2017. by Adriana Russo in Home Design.
Because lot sizes vary from large to small, setbacks may be an issue. Another factor is whether or not the site is level or has a slope. Sloped sites are quite workable but present unique challenges that must be considered. Generally on sloped lots the hangars are placed on the lower section and the home on the higher section which allows the home and hangar to blend with one another nicely.
Here are some home design tips that help you build your dream home.
A universal home design is a growing concept in house planning and construction that provides for changes that can occur in living such as disability issues, aging and general accessibility for everyone. Many homes today are built with the idea that no matter who the occupant is, the living spaces within as well as outside the home, should be readily used by just about anyone. A growing number of home designers, builders and contractors are embracing this concept as the baby boomer population ages and a new wave of disabled or elderly home occupants emerge.
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.
At the height of the housing downturn the most impacted areas in new home design were also once the most lucrative: kitchens and baths. For several years new home owners passed on popular and expensive add-ons to their kitchens and bathrooms such as water filtration systems, large pantry areas and natural wood cabinets. However, a recently published A.I.A Home Design Trends Survey indicates these functions and more might see a comeback.
Wood beams, walls, and countertops should be left in their barest look. If the item is of wood material, the most you should do is have it stained to bring out the natural beauty of the wood. Stone countertops should just be polished also to bring out the grains and specks of the material. Metal items should also just be polished and not painted.